By: Laschober Gerhard

Laschober Gerhard — Fri, 01 Aug 2008 13:47:56 +0000

Gerhard Laschober
Austria, Europe
e-mail: gml@aon.at
Commentary on a global water crises
the innovative answer could be a production of drinking water through water condensation from the vast and inexhaustible sources of water present in the aerial humidity in surrounding air. The free cooling medium for chilling the condensation surfaces on the water cooling equipment is the free atmospheric chill originating in the cool air layers (3000-4000 meters above sea level) which, as per the invention, will be transported without using artificial energy to the water condensation equipment (on the earth’s surface).
The mechanism of the “Balloon shuttle” function
The transportation medium is the mantle of the balloon, further on balloon only, which will fill up with free hot utility waste gases produced by industrial plants for waste disposal, facilities for waste disposal, power stations, tourist facilities, agrarian farms, facilities for power consumption etc. These warm utility waste gases act in the balloon as per the buoyancy physical laws and enable a fast rise of the balloon, from the place of filling to the place of cool air offtake (3000 – 4000 meters above sea level). The balloon will remain connected to the filling and offtake places by a cable which will be kept in its variable length by a cable reel.
Fixating cables in place will prevent further rise of the balloon by opening an escape opening in the balloon to let the warm gases out. Due to now missing buoyancy power of the warm gases and countermovement of the cables being reeled in, in addition to the mass of the balloon, the warm-air balloon will now go down. During the first short phase of the process, the surrounding cold air is flowing inside to the balloon and through the balloon. In the second phase, after closing the outlet opening, the cold air continues to flow into the balloon which will, after a complete fill of air and slight inner excessive pressure in the balloon, force the cold air out once again. During the third phase, the balloon is quickly moved to a filling and emptying equipment (located on the Earth surface) where the chilled air is emptied into the condensation equipment to cool off the condensation surfaces.
Filling the balloon with warm utility waste gases, the balloon ascent, draining the waste gases out, cool atmospheric air filling, descent of the balloon down to the water production equipment and draining of the cold air from the balloon into the equipment are constant and cyclical processes.
The results of my experiments and calculations are showing that to cool of the condensation surfaces on the water condensation equipment, there will be about 24 million cubic meters of cold atmospheric air from +3¬∫C to 5¬∫C at disposal and that will fully satisfy the needs to produce a volume of several hundreds thousand liters of drinking water (always in relation to the air temperature and humidity).
Mechanism of the “Perpetuum mobile” function
The cooling medium – atmospheric coldness – is drained through textile pipes manufactured with light-weight materials. The cold air is carried from far air layers towards the water condensation equipment (located on the Earth surface).
The textile piping which is floating freely upright is held up by a giant warm-air balloon which is using warm air as a carrier medium from the continuously incoming warm air
from the water condensation equipment and is supplied by the textile piping.
The free atmospheric coldness, free aerial humidity, free incoming and outgoing transportation of the balloon as well as improving our living environment, are the key advantages of this new invention which is protected by patent rights.
There are also possibilities to obtain recycling rights and utilization rights.

By: Fred B.

Fred B. — Wed, 09 Jul 2008 11:13:37 +0000

I would like to help people taking conciousness of actual water crisis. I’ve discovered:
.
http://www.StopWaterCrisis.com
.
with funny and original stuff showing an image of our “home” as you have never seen before…!

By: Elton Norris

Elton Norris — Tue, 13 May 2008 14:54:48 +0000

E mail address for E. Norris on above post regarding the electrolytic cell is bpnorr@live.com Sorry.

By: E.Norris

E.Norris — Mon, 12 May 2008 21:38:01 +0000

I have been the water treatment arena for several years working to bring electrolytic water treatment technolologys to the market. I have one patent on a electrolytic cell that will run continuosly without fouling of the electrodes by use of mechanical scraper blades which continuosly clean the electrodes while in operation. The company that now own this patent is in the process of starting up and has a commercial unit finished and tested.
I am currently working on a new technology involving a electrolytic cell which will revolotionalize the industry. I am in the patenting process and looking for a partner to fund the startup of the company for a sizable ownership. I am only looking for someone who understands the technology, the potentials of it and can move quickly. Not interested in VC’s or sheisters. This technology is industry changing and I will be glad to prove that to the right individual. Contact me at bpnorr@hotmail for discussions. E. Norris

By: Rafael

Rafael — Mon, 07 Apr 2008 21:49:12 +0000

Dean Kamen has been working on commercializing an extremely energy efficient water purifier.
http://money.cnn.com/2006/02/16/technology/business2_futureboy0216/index.htm

Comments on: Water Crisis: An Investment Opportunity

By: Laschober Gerhard

By: Fred B.

By: Elton Norris

By: E.Norris

By: Rafael